Stainless Steel Access Control Turnstiles , Sliding Turnstile
It may be divided according to the combination type of core
mechanism: single-core mechanism and dual-core mechanism.
-> Single-core mechanism: RNCF1066
The sliding barrier only equipped with single-core in the cabinet
as shown in Fig.1, usually be used in single lane or multi-lane
-> Dual-core mechanism: RNCF1066S
The sliding barrier equipped with independent dual-core in the
cabinet as shown in Fig.2, usually be used in multi-lane
Sliding Gate Turnstile
304# Stainless Steel (default)
Thickness of ply
brushed surface, polishing surface or anti-fingerprint surface
Material of flap
Stretching-out flap length
Height of Sliding Gate
max of 1500mm (optional)
Germany technological motor
DC Stepper motor
Opening / closing time
The time required to running state after power on
Automatic reset time after the failure
Mean time to failure
min. 5 000 000
-10℃ ~ +70℃
less than 95% not condensed
Indoor/Outdoor (with rain-tent cover)
relay dry contact signal; +12V level signal or DC12V pulse signal
RS232/ RS485 electric standard, communications range≤1200m.
The retractable sliding gate turnstile controls pedestrian access
between public and secure areas. The turnstile lane uses an array
of optical sensors to determine the number and direction of persons
passing through the lane. The turnstile uses a retractable sliding gate to block the pedestrian’s path.
The sliding turnstile system is provided with a standard electric
interface and can easily integrates the common 3rd party equipment
with read/write facilities, such as access control system, bar-code
scanner, Token /ID/IC card reader, time & attendance system,
coin collector, card collector, biometric systems (fingerprint
& face recognition), consumption system, ESD system and fare
collection system, etc.
The sliding gate turnstile provides bi-directional and
unidirectional access control and free passage modes (described
below). In access control mode, upon receipt of a valid card signal
from an access control system, the motorized barrier slidings of
the turnstile quickly retract into the cabinet, and the integrated
sensors allow a single user to pass through the turnstile in the
requested direction. If an unauthorized user attempts to tailgate
on the entry, the unit will recognize the illegal passage, a
violation alarm (with user configurable sounds) will sound, or red
notification lights will flash.
As a result, an orderly and civilized passage is provided for the
personnel in and out, and illegal personnel can be barred. At the
same time, a special fire control interface is equipped in the
system to meet the requirement of fire control passage, so that a
rapid down rod control may be realized in emergency for.
Typical areas of application are: Employee and Visitor Access
Control, Time & Attendance Integration, Loss Prevention,
Government Facilities, Corporate Lobbies, Buildings, Banks, Hotel,
Super market, Park, Building Sites, Museums, Retail outlets,
Railway Terminals and Airports etc.
STANDARD FEATURES & FUNCTIONS:
-> Obstacle safety detection with audible alarm, to convenient
for users to maintain and use.
-> The running status of device can be set up through pressing
the built-in small keyboard of the main control board.
-> With a variety of operating models and functions, it can be
programmed to be bi-directional access, or exit by sensors.
-> Equipped with infrared photo beam sensors, mechanical double
anti-folding feature, effectively protects against pedestrian
accidents / injuries.
-> Reset automatically, anti-tail, anti-reverse intrusion, dual
anti-pinch and stop unauthorized access.
-> Acoustic signal for announcement of unauthorised use.
-> Barrier locked in closed position to prevent force intrusion,
until a valid access control signal is received.
-> Time out reclosing feature, if never detect anyone pass thru
the barrier, will auto reclose at defined value. The standard
default is 10 seconds. (1 to 60 second adjustable);
-> Emergency-escape function: When power failure, barrier will
auto open to meet the request of fire protection. Also barrier will
open by pressing the emergency button which can be
remote-controlled whether the power is on or not. (Optional).
-> Standard fire alarm input interface, requires N.C normally
-> The turnstile system can easily integrates with the 3rd party equipment with read facilities, such as biometric reader,
consumption system, ESD system and access control system etc.
-> The turnstile system can be hooked up with multiple reader
equipments together. Rapid identification technique, available to
identify accurately and efficiently the magnetic card, bar code
card, ID/IC card, fingerprint and face detection etc.
-> Operation model: Both direction can be set as controlled
mode, free mode or disable model, two or one direction can be
controlled by switch- button or access controller. (Free model
means automatic open by infrared beam detecting, controlled model
means use valid access controller signal to open, disable model
means forbidding anyone pass thru).
-> Direction indicator function: Traffic lights on both sides of
the turnstile barrier are the indicator of access status, When the
traffic lights show green, it means to pass and the red light means
no-entry. The traffic lights on both sides can be set to indicate
access for left or right or bi-direction.
-> With normally open & normally closed working mode
-> Through the management computer to realize remote control and
-> Approved CE certificate
The turnstile provides bi-directional access control. Each
direction may be in one of three states:
-> Free passage: all person are authorized to pass under all
-> Controlled access: each person must use a card reader before
being authorized to pass
-> Lane closed: no persons are authorized to pass, and security
cards are ignored
The manufacturer guarantees that the turnstile complies with
applicable statutory safety and electromagnetic requirements
provided that the instructions on storage, installation and
operation are observed.
The warranty period is 12 (twelve) months commencing from the date
Shenzhen Rona Intelligent Technology Co., Ltd is a Chinese
manufacturing firm located in Shenzhen. When you are ready to find
out how we can service your needs, use the information listed here
to reach our sales and service office. Monday to Friday: 8:30am -
6:00pm (UTC/GMT +8). We look forward to hearing from you.
Head office: A603, 6F, Yousong Technology Building, E Ring 1st Rd,
Loghua Town, Bao'an, Shenzhen, China, 518109
Factory: 3F&4F, Building C, Longlian Industrial Zone, Zhonghua
Rd, Longhuan Town, Bao'an, Shenzhen, China, 518109
Contact Person: Ms. Sophia Wey
Tel: +86-755-88853586 ext 8039
Fax: +86-755-88853586 ext 8002